<?xml version="1.0" encoding="utf-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" version="2.0"><channel><title>RONGXING DRIVE</title><link>https://www.shaftdrivecoupling.com/</link><description>Industrial Couplings and Cardan Shafts</description><item><title>Pin Bush Coupling Size Chart, Dimensions and Drawings</title><link>https://www.shaftdrivecoupling.com/technical-resources/pin-bush-coupling-size-chart.html</link><description>&lt;p&gt;This pin bush coupling size chart covers RONGXING DRIVE TL and TLL flexible sleeve pin couplings. Compare the model-specific torque, permissible speed, shaft bores and installation dimensions with the corresponding drawing. TL uses the sleeve-pin layout; TLL adds a brake drum. All dimensions are in mm unless another unit is stated. The English PDF catalogue contains the same two series for preliminary comparison.&lt;/p&gt;&lt;p&gt;&lt;a href=&quot;https://www.shaftdrivecoupling.com/zb_users/upload/2026/11/Pin-Bush-Coupling-TL-TLL-Size-Chart-2026-11-21.pdf&quot;&gt;Download the English TL/TLL pin bush coupling catalogue PDF&lt;/a&gt; (3 pages, revision 21 November 2026).&lt;/p&gt;&lt;h2&gt;Choose the series before comparing dimensions&lt;/h2&gt;&lt;p&gt;A &lt;a href=&quot;https://www.shaftdrivecoupling.com/pin-bush-coupling&quot;&gt;pin and bush coupling&lt;/a&gt; can have different pin, sleeve and flange arrangements. Use the &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/tl-flexible-sleeve-pin-coupling.html&quot;&gt;TL Flexible Sleeve Pin Coupling&lt;/a&gt; drawing for the basic sleeve-pin layout and the &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/tll-flexible-sleeve-pin-coupling-with-brake-drum.html&quot;&gt;TLL Flexible Sleeve Pin Coupling with Brake Drum&lt;/a&gt; drawing for the brake-drum variant.&lt;/p&gt;&lt;p&gt;Other elastic pin designs require their own model tables. A similar bore or outside diameter does not establish that pins, bushes or complete assemblies can be interchanged.&lt;/p&gt;&lt;h2&gt;TL pin bush coupling drawing and size chart&lt;/h2&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/upload/2026/11/tl-assembly-drawing.png&quot; alt=&quot;TL sleeve pin coupling assembly drawing with bore, L, L1, D, S and A dimensions&quot; style=&quot;max-width:100%;width:440px;height:auto&quot;/&gt;&lt;figcaption&gt;TL source assembly drawing. Match its symbols to the TL model row.&lt;/figcaption&gt;&lt;/figure&gt;&lt;p&gt;Tn is nominal torque in N·m; [n] is permissible speed in r/min. Bore diameters and lengths, D, S and A are in mm. Mass is in kg.&lt;/p&gt;&lt;div role=&quot;region&quot; aria-label=&quot;TL size chart&quot; tabindex=&quot;0&quot; style=&quot;overflow-x:auto;margin:20px 0&quot;&gt;&lt;table style=&quot;border-collapse:collapse;width:100%;min-width:920px&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Model&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Tn (N·m)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;[n] (r/min)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Bore d / d₁ / d₂ (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Bore length L₁ (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Bore length L (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;D (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;S (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;A (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Mass (kg)&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL1&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;6.3&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;8800&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;9～14&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;20～32&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;14～20&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;71&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;3&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;18&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1.2&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL2&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;16&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;7600&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;12～19&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;32～42&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;20～42&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;80&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;3&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;18&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1.8&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL3&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;31.5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;6300&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;16～25&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;42～62&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;30～62&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;95&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;4&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;35&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2.0&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL4&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;63&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;5700&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;20～32&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;52～82&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;38～82&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;106&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;4&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;35&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2.4&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;125&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;4600&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;25～40&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;62～112&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;44～112&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;130&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;45&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;8.5&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL6&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;250&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;3800&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;32～50&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;82～112&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;60～112&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;160&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;45&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;11&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL7&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;500&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;3600&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;40～65&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;112～142&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;84～142&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;190&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;45&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;16&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL8&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;710&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;3000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;45～80&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;112～172&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;84～172&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;224&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;6&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;65&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;26&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL9&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2850&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;50～85&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;112～172&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;84～172&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;250&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;6&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;65&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;32&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL10&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2300&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;63～120&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;142～212&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;107～212&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;315&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;8&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;80&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;68&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL11&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;4000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1800&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;80～140&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;172～252&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;132～252&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;400&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;10&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;100&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;125&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL12&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;8000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1450&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;100～180&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;212～302&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;167～302&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;475&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;12&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;130&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;220&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TL13&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;16000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1150&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;120～220&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;212～352&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;167～352&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;600&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;14&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;180&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;430&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;/div&gt;&lt;p&gt;The source groups TL bore lengths under Y/J/J₁/Z and gives separate L₁ and L columns. Confirm the shaft and bore form with the drawing. The source note identifies Y/J₁/Z₁ arrangements and calls for a structural check for J/Z forms. Preserve the access dimension marked A when reviewing the surrounding equipment.&lt;/p&gt;&lt;h2&gt;TLL pin bush coupling dimensions with brake drum&lt;/h2&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/upload/2026/11/tll-assembly-drawing.png&quot; alt=&quot;TLL sleeve pin coupling assembly drawing with brake drum D0 and B dimensions&quot; style=&quot;max-width:100%;width:400px;height:auto&quot;/&gt;&lt;figcaption&gt;TLL source assembly drawing. The brake-drum envelope adds D₀ and B to the dimensional review.&lt;/figcaption&gt;&lt;/figure&gt;&lt;p&gt;Use the TLL row for torque, speed, bore and installation comparison. Length L is listed for Y-type bores; L₁ is listed for J/Z-type bores. All dimensions below are in mm; mass is in kg.&lt;/p&gt;&lt;div role=&quot;region&quot; aria-label=&quot;TLL size chart&quot; tabindex=&quot;0&quot; style=&quot;overflow-x:auto;margin:20px 0&quot;&gt;&lt;table style=&quot;border-collapse:collapse;width:100%;min-width:920px&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Model&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Tn (N·m)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;[n] (r/min)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Bore d / d₁ / d₂ (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Y bore length L (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;J/Z bore length L₁ (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;D₀ (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;B (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;D (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;S (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;A (mm)&lt;/th&gt;&lt;th style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;Mass (kg)&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL1&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;125&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;3800&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;25～35&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;62～82&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;44～82&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;200&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;85&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;130&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;45&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;10&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL2&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;250&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;3000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;32～42&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;82～112&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;60～112&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;250&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;105&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;160&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;45&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;16&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL3&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;500&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2400&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;40～48&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;112&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;84～112&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;315&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;132&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;190&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;45&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;30&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL4&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;710&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2400&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;45～63&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;112～142&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;84～142&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;315&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;132&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;224&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;6&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;65&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;40&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL5&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2400&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;50～71&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;112～142&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;84～142&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;315&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;168&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;250&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;6&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;65&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;48&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL6&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;2000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1900&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;63～95&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;142～172&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;107～172&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;400&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;168&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;315&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;8&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;80&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;94&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL7&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;4000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1500&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;80～110&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;172～212&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;132～212&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;500&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;210&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;400&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;10&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;100&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;130&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL8&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;8000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1200&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;100～130&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;212～252&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;167～252&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;630&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;265&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;475&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;12&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;130&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;310&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;TLL9&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;16000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;1000&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;120～170&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;212～302&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;167～302&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;710&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;298&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;600&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;14&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;180&lt;/td&gt;&lt;td style=&quot;padding:10px;border:1px solid #bdccd6;text-align:left;white-space:nowrap&quot;&gt;580&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;/div&gt;&lt;h2&gt;How to read the coupling specification&lt;/h2&gt;&lt;ul class=&quot; list-paddingleft-2&quot;&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Model:&lt;/strong&gt; identifies a size within its own series. A size number is not the shaft diameter.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Tn and [n]:&lt;/strong&gt; compare torque and permissible speed for the same row. Series maxima belong to different sizes and are not simultaneous operating ratings.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;d, d₁ and d₂:&lt;/strong&gt; refer to the bore arrangements shown. Confirm both shaft interfaces, keys and fits.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;L and L₁:&lt;/strong&gt; are drawing-specific bore lengths. Match the selected shaft form.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;D, S and A:&lt;/strong&gt; must be interpreted from the corresponding assembly drawing, including the access shown.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;D₀ and B:&lt;/strong&gt; describe the TLL brake-drum envelope.&lt;/p&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;These tables reproduce catalogue dimensions for preliminary comparison. Confirm the final model, dimensions, materials and operating suitability with RONGXING DRIVE before ordering, manufacture or installation.&lt;/p&gt;&lt;h2&gt;Pin, bolt and bush replacement checks&lt;/h2&gt;&lt;p&gt;The complete-coupling chart does not establish the pin thread, shoulder length, fastener grade or tightening torque. Use the approved pin and assembly drawings for those details. Do not infer a coupling bolt specification from shaft bore alone.&lt;/p&gt;&lt;p&gt;For a coupling rubber bush enquiry, provide the existing series and model, photographs or a parts drawing, inside diameter, outside diameter, length and profile. Confirm material grade and hardness for the actual duty. The dimensional catalogue does not specify a universal bush material, and a matching outside diameter does not prove replacement suitability.&lt;/p&gt;&lt;h2&gt;Prepare the data for preliminary selection&lt;/h2&gt;&lt;p&gt;Send operating torque or power, speed, peak loads and duty cycle, both shaft diameters and keyways, installed dimensions, maintenance access, expected shaft movement and operating conditions. Include the existing drawing where available.&lt;/p&gt;&lt;p&gt;For the next checks, see &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/pin-bush-coupling-selection.html&quot;&gt;pin bush coupling selection&lt;/a&gt; and the &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/pin-bush-coupling-installation.html&quot;&gt;pin bush coupling installation checklist&lt;/a&gt;.&lt;/p&gt;&lt;h2&gt;Frequently asked questions&lt;/h2&gt;&lt;h3&gt;How do I find the correct pin bush coupling size?&lt;/h3&gt;&lt;p&gt;Identify the series and compare operating torque, speed, both shaft bores, bore lengths and installation space. Then check the selected model against its drawing and duty. Shaft diameter alone is insufficient.&lt;/p&gt;&lt;h3&gt;Are TL and TLL coupling dimensions interchangeable?&lt;/h3&gt;&lt;p&gt;TL and TLL use different assembly layouts. TLL includes a brake drum and additional D0 and B dimensions. Compare the complete drawing and model row before replacing either series.&lt;/p&gt;&lt;h3&gt;Where can I download a pin bush coupling size chart PDF?&lt;/h3&gt;&lt;p&gt;The English TL/TLL PDF catalogue linked above contains both series, assembly drawings, 22 model rows and preliminary selection notes. Its revision date is 21 November 2026.&lt;/p&gt;&lt;h3&gt;Does the size chart specify coupling bolt or pin threads?&lt;/h3&gt;&lt;p&gt;The tables describe complete-coupling dimensions and ratings. They do not provide a pin-thread schedule. Confirm the pin thread, shoulder geometry, material and tightening requirements from the approved parts drawing.&lt;/p&gt;&lt;h3&gt;Can I find the rubber bush size from the shaft bore?&lt;/h3&gt;&lt;p&gt;A shaft-bore diameter does not define the bush dimensions. Record the coupling series, pin arrangement, bush inside and outside diameters, length and profile, then verify the replacement against the parts drawing.&lt;/p&gt;&lt;h3&gt;Which rubber bush material should I specify?&lt;/h3&gt;&lt;p&gt;Use the material grade and hardness approved for the exact coupling and duty. Temperature, fluids, load and movement affect the review. These TL/TLL dimensional tables do not establish a universal rubber or polyurethane specification.&lt;/p&gt;&lt;h2&gt;Catalogue source and revision&lt;/h2&gt;&lt;p&gt;TL and TLL tables and assembly drawings are based on the RONGXING DRIVE Chinese product catalogue, printed pages 46–47. English dimensional catalogue revision: 21 November 2026. &lt;a href=&quot;https://www.shaftdrivecoupling.com/zb_users/upload/2026/11/Pin-Bush-Coupling-TL-TLL-Size-Chart-2026-11-21.pdf&quot;&gt;Download the TL/TLL size chart PDF&lt;/a&gt; to keep the two series together for preliminary review.&lt;/p&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;</description><pubDate>Sat, 21 Nov 2026 17:16:32 +0800</pubDate></item><item><title>Gear Coupling Types Explained: Full vs Half, How They Work, and What to Specify</title><link>https://www.shaftdrivecoupling.com/technical-resources/gear-coupling-types.html</link><description>&lt;p&gt;A full gear coupling has two flexible gear meshes, one at each end. A half gear coupling, often called a flex-rigid coupling, has one flexible gear mesh and one rigid connection. When a purchase order says “half gear coupling”, check the drawing and the scope of supply. The term can also refer to a single flexible half sold as a component.&lt;/p&gt;&lt;p&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/gicl-crowned-gear-coupling-drawing-01.png&quot; alt=&quot;GICL crowned gear coupling assembly drawing&quot;/&gt;&lt;/p&gt;&lt;p&gt;&lt;em&gt;RONGXING DRIVE GICL assembly drawing. Use the drawing with the selected size row to check the bore, flange and installation envelope.&lt;/em&gt;&lt;/p&gt;&lt;h2&gt;Difference between full gear coupling and half gear coupling&lt;/h2&gt;&lt;table&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th&gt;Check&lt;/th&gt;&lt;th&gt;Full gear coupling (flex-flex)&lt;/th&gt;&lt;th&gt;Half gear coupling (flex-rigid)&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;Flexible gear meshes&lt;/td&gt;&lt;td&gt;Two&lt;/td&gt;&lt;td&gt;One&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Shaft movement&lt;/td&gt;&lt;td&gt;Two flex planes can accommodate parallel offset as well as angular misalignment, within the design limits&lt;/td&gt;&lt;td&gt;The single flex plane accommodates angular movement at that mesh. Review the entire shaft line if parallel offset is required&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Drawing check&lt;/td&gt;&lt;td&gt;Locate both flex planes and verify shaft-end spacing, both bores and the flange envelope&lt;/td&gt;&lt;td&gt;Identify the flexible end and confirm the pilot, bolt circle and mating face on the rigid end&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Replacement check&lt;/td&gt;&lt;td&gt;Confirm the sleeve, hub and flange arrangement at both ends&lt;/td&gt;&lt;td&gt;Confirm whether the order covers a flexible half alone or a complete flex-rigid assembly&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;p&gt;Sleeve construction is a separate choice. A continuous sleeve spans both hubs in one piece. A flanged-sleeve assembly joins two sleeve flanges, so check the joint diameter and the space needed to reach the bolts. A spacer changes the distance between coupling ends for a particular shaft layout or maintenance clearance. A telescopic design addresses specified axial movement. A brake-drum design adds a braking surface. Specify the number of flexible meshes separately. The Hydraulic Institute lists both &lt;a href=&quot;https://www.pumps.org/wp-content/uploads/2023/04/Couplings-Guidebook-2022_E-PDF-TOC.pdf&quot;&gt;close-coupled and spacer gear coupling arrangements&lt;/a&gt;.&lt;/p&gt;&lt;h2&gt;Gear coupling working principle&lt;/h2&gt;&lt;p&gt;The driving shaft turns an externally toothed hub. Its teeth mesh with the internal teeth of a sleeve and transmit torque into the sleeve assembly. In a common bolted full gear coupling, torque crosses the sleeve flanges, passes through the second gear mesh and reaches the driven shaft. In a flex-rigid assembly, the second connection is rigid.&lt;/p&gt;&lt;p&gt;Crowned external teeth let the hub and sleeve operate at a small angle to each other as the teeth remain engaged. Relative movement at the tooth surfaces makes lubrication important. The seals help retain lubricant. Use the selected model’s instructions for alignment, lubricant, quantity and maintenance interval, and verify the allowable combination of torque, speed and displacement. &lt;a href=&quot;https://www.pumps.org/resources/pump-faqs/&quot;&gt;Hydraulic Institute pump FAQs&lt;/a&gt;&lt;/p&gt;&lt;h2&gt;Gear coupling parts and what they do&lt;/h2&gt;&lt;table&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th&gt;Part name&lt;/th&gt;&lt;th&gt;Function&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;Externally toothed hub&lt;/td&gt;&lt;td&gt;Fits the shaft and transfers torque to or from the sleeve through the tooth mesh&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Internally toothed sleeve&lt;/td&gt;&lt;td&gt;Encloses the hub teeth and carries torque through the coupling body&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Flange bolts and nuts, where fitted&lt;/td&gt;&lt;td&gt;Join mating flanges in bolted designs&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Hub-to-sleeve seal&lt;/td&gt;&lt;td&gt;Retains lubricant where the hub passes through the sleeve&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Flange gasket, where fitted&lt;/td&gt;&lt;td&gt;Seals the joint between mating faces&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Lubrication plug or fitting, where fitted&lt;/td&gt;&lt;td&gt;Provides access to the lubricant cavity&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Key, where specified&lt;/td&gt;&lt;td&gt;Transfers torque between a keyed shaft and hub&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;p&gt;For spare parts, send the model, size, drawing revision and item number. Include a photo if the marking is unclear. For a sleeve or hub replacement, confirm the tooth geometry and mating part as well as the shaft fit.&lt;/p&gt;&lt;h2&gt;What to include in a gear coupling material specification&lt;/h2&gt;&lt;p&gt;Specify the material by component. Ask the supplier to identify the grade and governing standard for the toothed hub and sleeve separately, along with any specified heat treatment and hardness. A general description such as “steel coupling” leaves those requirements open.&lt;/p&gt;&lt;table&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th&gt;Component&lt;/th&gt;&lt;th&gt;Details to confirm on the drawing or purchase specification&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;Toothed hubs and sleeves&lt;/td&gt;&lt;td&gt;Grade and standard for each part, heat treatment, hardness range and test location. If the design calls for surface hardening, specify the required case depth and acceptance method&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Rigid flange or spacer, if used&lt;/td&gt;&lt;td&gt;Material grade, interface dimensions and any inspection requirements&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Fasteners&lt;/td&gt;&lt;td&gt;Property class or material specification and approved tightening instructions&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Seals and gaskets&lt;/td&gt;&lt;td&gt;Material compatible with the lubricant and service temperature&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Documentation&lt;/td&gt;&lt;td&gt;Material certificates, heat-treatment records or inspection reports required by the purchase order&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;h2&gt;How to find the right gear coupling size&lt;/h2&gt;&lt;p&gt;Select the coupling configuration first. Use the manufacturer&amp;#39;s size table to screen for the required torque at operating speed, then check each bore and shaft fit separately. Compare the selected assembly drawing with the measured shaft-end gap, flange clearances and room for maintenance. Ask the supplier to verify how speed, torque and misalignment combine at the selected size.&lt;/p&gt;&lt;h2&gt;How to specify a replacement gear coupling&lt;/h2&gt;&lt;p&gt;Start with the installed drawing and mark the flex planes, shaft-end gap and mating interfaces. On a mill or conveyor drive, include starting, reversing or shock loads if present. Send continuous and peak torque in N·m or kN·m, operating and maximum speed in r/min, both shaft diameters and usable engagement lengths in mm, and the expected angular, parallel and axial movement. Include the available guard space, operating temperature, and any restrictions on access for lubrication.&lt;/p&gt;&lt;p&gt;The &lt;a href=&quot;https://www.shaftdrivecoupling.com/gear-couplings/gicl-crowned-gear-coupling.html&quot;&gt;GICL Crowned Gear Coupling&lt;/a&gt; provides an assembly drawing and size-specific tables for preliminary review. Use the drawing to interpret the dimensions in the selected row. Before ordering, ask RONGXING DRIVE to confirm the shaft fits, material requirements and combined operating conditions for that size.&lt;/p&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;</description><pubDate>Fri, 20 Nov 2026 00:15:27 +0800</pubDate></item><item><title>How should I compare gear and grid couplings for a drive with shock loads?</title><link>https://www.shaftdrivecoupling.com/technical-resources/gear-vs-grid-couplings-shock-loads.html</link><description>&lt;p&gt;Shortlist a grid coupling when torsional compliance is important, and a crowned gear coupling when high torque within a tight diameter is the main constraint. Compare specific sizes against the same duty, including the magnitude, duration and frequency of torque peaks. Where the aim is to reduce the shock reaching a gearbox or another component, ask for stiffness data and check the response of the whole drive.&lt;/p&gt;&lt;h2&gt;How each coupling carries a shock load&lt;/h2&gt;&lt;p&gt;In a grid coupling, a steel spring grid bridges the grooves in two hubs. The grid deflects as torque rises, allowing relative twist between the hubs. The effect on the transmitted peak depends on the grid&amp;#39;s stiffness and the inertia and response of the connected machines. For repeated impacts or torque reversals, ask how the proposed size behaves across the load range. &lt;a href=&quot;https://hal.science/hal-04764485&quot;&gt;Experimental study of grid coupling stiffness and dynamics&lt;/a&gt;&lt;/p&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/jsa-grid-coupling-drawing-01.png&quot; alt=&quot;RONGXING DRIVE JSA grid coupling assembly drawing showing the cover, hub bores and hub gap&quot;/&gt;&lt;figcaption&gt;The JSA drawing identifies the hub bore, hub gap and cover envelope to check against the installation. &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/jsa-grid-coupling.html&quot;&gt;RONGXING DRIVE JSA Grid Coupling&lt;/a&gt;&lt;/figcaption&gt;&lt;/figure&gt;&lt;p&gt;In a crowned gear coupling, external hub teeth mesh with internal sleeve teeth. Crowning allows some angular movement at the mesh. Torque, misalignment and friction influence how the teeth share the load. When starting or reversing under load, ask the supplier to check tooth loading and clearance under the actual duty. &lt;a href=&quot;https://research-hub.nlr.gov/en/publications/theoretical-and-experimental-study-on-gear-coupling-contact-and-l-2/&quot;&gt;Experimental study of gear coupling contact and loads&lt;/a&gt;&lt;/p&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/gicl-crowned-gear-coupling-drawing-01.png&quot; alt=&quot;RONGXING DRIVE GICL crowned gear coupling section drawing showing the hubs, sleeves and bolted joint&quot;/&gt;&lt;figcaption&gt;The GICL section drawing shows the sleeve and hub arrangement. Use the drawing for the selected size to check bore, shaft engagement and installation clearance. &lt;a href=&quot;https://www.shaftdrivecoupling.com/gear-couplings/gicl-crowned-gear-coupling.html&quot;&gt;RONGXING DRIVE GICL Crowned Gear Coupling&lt;/a&gt;&lt;/figcaption&gt;&lt;/figure&gt;&lt;h2&gt;Compare both candidates against the same duty&lt;/h2&gt;&lt;table style=&quot;width: 100%; table-layout: fixed;&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Check&lt;/th&gt;&lt;th style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;What to give the supplier&lt;/th&gt;&lt;th style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;What to confirm for each size&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Running and peak torque&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Running torque, positive and negative peaks in N·m, event duration and frequency&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Continuous rating under the stated duty and the allowable peak for that duration and repetition&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Drive response&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Starting, braking and reversing sequence, operating speed range in rpm, and shaft inertias if available&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Torsional stiffness and, where relevant, whether a drive-level torsional check is needed&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Fit and alignment&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Both shaft diameters, shaft-end separation and available envelope in mm, plus expected operating offsets&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Bore and key fit, hub engagement, installation clearance and permitted combined misalignment&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Lubrication and access&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Temperature, contamination and space to open the guard and coupling cover or sleeve&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Approved lubricant, service interval, seals, and how wear parts can be inspected or replaced&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;p&gt;&lt;strong&gt;Example.&lt;/strong&gt; A drive delivering 75 kW at the coupling at 300 rpm has a running torque of about 2,390 N·m. The steady-speed conversion is 9,550 × power in kW ÷ speed in rpm. If a measured loaded start reaches 5,000 N·m for 0.2 seconds, give the supplier that peak, its duration and the number of starts per hour. Confirm the duty or service factor for the running-torque check and how the supplier treats the measured transient. For a jam, use measured torque or an engineering estimate based on the drive and its protection settings.&lt;/p&gt;&lt;h2&gt;What to send for a model review&lt;/h2&gt;&lt;p&gt;A conveyor that starts loaded and a mill drive that reverses can have similar running torque but very different peak histories. Send an annotated torque trace if available, or list the worst events and how often they occur. Add a shaft and guard drawing, operating speed range, lubricant access and any history of worn teeth, cracked grids or repeated failures. For a RONGXING DRIVE GICL or JSA candidate, ask for the exact size, bore arrangement and written acceptance of the stated duty. If a jam must trigger a controlled disconnect, specify a torque-limiting device and its trip requirement.&lt;/p&gt;</description><pubDate>Mon, 16 Nov 2026 22:40:24 +0800</pubDate></item><item><title>How can a maintenance team investigate vibration in an industrial cardan shaft?</title><link>https://www.shaftdrivecoupling.com/technical-resources/cardan-shaft-alignment-tolerances-vibration.html</link><description>&lt;p&gt;When an industrial Cardan shaft starts to vibrate, record the shaft speed, machine load and vibration at the bearings on both sides of the drive. Compare those readings with a baseline taken under similar conditions. During an isolated shutdown, measure the true operating angle at each universal joint and check the yoke phasing, flange seating and shaft condition. A peak at twice shaft speed gives the team a reason to check joint geometry and phasing, alongside other possible sources in the drive train. &lt;a href=&quot;https://journals.sagepub.com/doi/10.1177/1077546319889846&quot;&gt;Experimental study of second-order Cardan-joint vibration&lt;/a&gt;&lt;/p&gt;&lt;h2&gt;1. Capture the vibration before moving the machine&lt;/h2&gt;&lt;p&gt;If the drive can run within site operating limits, collect data with guards in place, using installed sensors or approved measurement points on stationary bearing housings. If vibration rises sharply or a guard is rubbing, follow the site&amp;#39;s shutdown procedure. Before removing a guard, touching the shaft or setting up alignment tooling, isolate and verify all hazardous energy sources under the site procedure. Support the shaft before releasing its fasteners. &lt;a href=&quot;https://www.hse.gov.uk/work-equipment-machinery/maintenance.htm&quot;&gt;HSE guidance on safe machinery maintenance&lt;/a&gt;&lt;/p&gt;&lt;p&gt;Log the speed of the &lt;strong&gt;Cardan shaft itself&lt;/strong&gt;. Motor rpm can be different when a gearbox lies between the motor and the shaft. Record the load, operating temperature or warm-up state, and machine position. If a rolling-mill spindle changes angle as the roll gap changes, record the roll position with each vibration reading.&lt;/p&gt;&lt;p&gt;Use the same sensor points and directions for repeat measurements. Where accessible, record horizontal, vertical and axial readings on the stationary housings nearest each end of the shaft. Save the time waveform and spectrum. For a variable-speed drive, use a speed reference and order tracking so you can tell which peaks follow shaft rpm. At a hypothetical shaft speed of 600 rpm, 1× is 10 Hz and 2× is 20 Hz. Those frequencies identify orders for that running condition. Acceptance limits come from the machine&amp;#39;s approved criteria.&lt;/p&gt;&lt;table style=&quot;width: 100%; table-layout: fixed;&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Observation&lt;/th&gt;&lt;th style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;What to check next&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;A strong 1× component follows Cardan shaft speed&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Check for flange or pilot seating problems, runout and signs of damaged or missing balance weights. Check the adjacent machine for another source at the same frequency.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;A strong 2× component appears after spline or yoke work&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Verify both true joint angles, their planes and the specified phase marks. Compare readings at the two machine ends and check for overlapping speeds from other components.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Impacts, heat or noise are concentrated near one end&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Under isolation, inspect the universal joint, nearby bearings and flange fasteners. Check play, lubrication condition and wear using the approved service procedure.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;A peak rises in a narrow speed band, or with a particular load or roll position&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Compare readings across approved operating points. Check whether the geometry shifts with position or load and have the team assess possible resonance or process excitation.&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;p&gt;Treat these patterns as leads. Corroborate the spectrum with physical measurements and the maintenance history before choosing a correction.&lt;/p&gt;&lt;h2&gt;2. Measure both joint angles and verify yoke phasing&lt;/h2&gt;&lt;p&gt;The true operating angle at each joint is the angle between the Cardan shaft axis and the connected machine shaft axis. Measure the driver, Cardan shaft and driven axes using the approved datums and a method suited to the layout. If there is offset in both the vertical and horizontal planes, determine the true three-dimensional joint angles from the axis measurements. A single side-view reading can miss part of the angle.&lt;/p&gt;&lt;p&gt;In a conventional coplanar two-joint layout, equal true operating angles and the specified yoke phase allow the second joint to cancel the first joint&amp;#39;s cyclic speed variation at the output in ideal geometry. The intermediate shaft still sees cyclic speed variation. Use the assembly drawing for compound-angle layouts, multiple shafts or intentional out-of-phase arrangements. &lt;a href=&quot;https://atna-mam.utcluj.ro/index.php/Acta/article/view/2935&quot;&gt;University study of Cardan joint arrangement and speed variation&lt;/a&gt;&lt;/p&gt;&lt;p&gt;Verify the yoke orientation against the drawing and match marks, particularly if someone separated the sliding spline during an overhaul. Photograph marks and record the as-found angles before adjusting machine feet or refitting the shaft. A laser setup for an offset drive must use the references and fixtures specified for that geometry.&lt;/p&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/swc-bf-telescopic-flanged-cardan-shaft-drawing-01.png&quot; alt=&quot;RONGXING DRIVE SWC-BF assembly drawing showing the flanged ends, universal joints and telescopic shaft section&quot;/&gt;&lt;figcaption&gt;The SWC-BF telescopic flanged Cardan shaft illustrates the two joint ends and the sliding section. Use the drawing for the installed assembly to identify its measurement datums and acceptance limits. &lt;a href=&quot;https://www.shaftdrivecoupling.com/cardan-shafts/swc-bf-telescopic-flanged-cardan-shaft.html&quot;&gt;RONGXING DRIVE SWC-BF assembly details&lt;/a&gt;&lt;/figcaption&gt;&lt;/figure&gt;&lt;h2&gt;3. Find the Cardan shaft alignment tolerances for the installed drive&lt;/h2&gt;&lt;p&gt;Cardan shaft alignment tolerances depend on the shaft model, the machine layout and the operating duty. Start with the machine builder&amp;#39;s alignment specification and the approved shaft drawing or service manual. Ask the responsible engineer or manufacturer to resolve missing or conflicting limits before accepting the drive for service. A catalogue operating-angle limit describes the joint&amp;#39;s articulation under its stated conditions. The permitted end-to-end angle difference, flange runout, yoke phase and vibration each need their own acceptance criterion.&lt;/p&gt;&lt;table style=&quot;width: 100%; table-layout: fixed;&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Check&lt;/th&gt;&lt;th style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Record&lt;/th&gt;&lt;th style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Where to get the limit&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Driver and driven joint geometry&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;True angle at each end in degrees, angle difference if specified, measurement planes and machine position&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Approved layout and shaft application data for the actual speed, torque and duty&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Yoke phasing&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Match-mark or yoke orientation, with phase angle in degrees if specified&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Assembly drawing or shaft service instruction&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Flange, pilot and runout&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Seating condition and radial and face total indicator readings in mm at specified datums&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Machine and shaft flange drawings or installation instructions&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Telescopic travel, where fitted&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Installed, minimum and maximum working lengths in mm from the same datums&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Drawing limits for usable travel and spline engagement&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Machine vibration&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Sensor point, direction, amplitude, units and operating condition&lt;/td&gt;&lt;td style=&quot;white-space: normal; overflow-wrap: anywhere;&quot;&gt;Site or machine acceptance criteria and the applicable measurement standard, where specified&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;p&gt;A drive can have intentional parallel offset. Compare measured geometry with the approved layout before changing shims or machine position. A vibration value in mm/s is meaningful for acceptance only with the specified location, measurement convention and operating condition. &lt;a href=&quot;https://www.iso.org/standard/63180.html&quot;&gt;ISO 20816-1 measurement and evaluation scope&lt;/a&gt;&lt;/p&gt;&lt;h2&gt;4. Inspect, correct and retest&lt;/h2&gt;&lt;p&gt;With the drive isolated, inspect flange faces and pilots for debris, fretting or damage. Check fastener condition, joint play and lubrication against the service instructions. On telescopic shafts, look for spline binding or wear and verify that working length stays within the approved travel throughout the machine&amp;#39;s operating range. Record suspected tube damage or lost balance weights and refer the assembly for qualified runout or balance assessment before making changes to it.&lt;/p&gt;&lt;p&gt;After correcting a verified defect, record what changed and repeat measurements with the guards restored and the drive released for the test. Compare the same sensor points, speeds, loads and machine positions with the as-found readings. Record the before-and-after spectra and the measured geometry, then apply the site&amp;#39;s restart and acceptance criteria. If the original peak remains, include the gearbox, bearings, foundation and process excitation in the follow-up investigation.&lt;/p&gt;&lt;p&gt;If you need an engineering review of a RONGXING DRIVE shaft, send the model or drawing reference, latest spectrum with shaft rpm, both joint angles, phase-mark photos, flange runout and installed length. For a telescopic unit, include the shortest and longest working positions. Note any work done shortly before the vibration began. &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/industrial-cardan-shaft-replacement-drawings-checks.html&quot;&gt;Industrial Cardan shaft replacement drawings and checks&lt;/a&gt;&lt;/p&gt;</description><pubDate>Mon, 16 Nov 2026 22:16:42 +0800</pubDate></item><item><title>Coupling Alignment: Misalignment Types and Tolerances</title><link>https://www.shaftdrivecoupling.com/technical-resources/coupling-alignment-misalignment-tolerances.html</link><description>&lt;p&gt;Coupling alignment positions the driver and driven shafts so their rotational centrelines come within the machine train’s specified limits in service. Measure offset and angularity in both the vertical and horizontal planes. Check axial spacing separately against the coupling drawing. For a flexible coupling, use the approved installation targets for the train and confirm the coupling’s capacity for the movement expected during operation.&lt;/p&gt;&lt;h2&gt;What are the types of coupling misalignment?&lt;/h2&gt;&lt;div class=&quot;table-scroll&quot; style=&quot;overflow-x:auto&quot;&gt;&lt;table style=&quot;width:100%;min-width:470px;table-layout:fixed&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th style=&quot;white-space:normal;overflow-wrap:anywhere&quot; scope=&quot;col&quot;&gt;Type&lt;/th&gt;&lt;th style=&quot;white-space:normal;overflow-wrap:anywhere&quot; scope=&quot;col&quot;&gt;What it describes&lt;/th&gt;&lt;th style=&quot;white-space:normal;overflow-wrap:anywhere&quot; scope=&quot;col&quot;&gt;What to record&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;Angular&lt;/td&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;The shaft centre lines point in different directions.&lt;/td&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;Vertical and horizontal slopes, usually in mm per 100 mm or in degrees. Record the unit and method.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;Parallel (radial) offset&lt;/td&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;The shaft centrelines are displaced sideways at the specified reference plane. Offset and angularity can occur together.&lt;/td&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;Vertical and horizontal offset in mm. Identify the plane used to report it.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;Axial spacing or movement&lt;/td&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;The distance between two specified faces along the shaft axis, or a change in that distance during operation.&lt;/td&gt;&lt;td style=&quot;white-space:normal;overflow-wrap:anywhere&quot;&gt;The installed gap in mm, the two faces used, and the expected axial travel or end float where applicable.&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;/div&gt;&lt;p&gt;Keep the measuring reference with each reading. A shaft-end distance can differ from the hub-face gap if either hub is recessed or projects beyond its shaft end. For the drawing references used on a crowned gear coupling, see the &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/gear-coupling-gap-chart-alignment.html&quot;&gt;gear coupling gap and alignment guide&lt;/a&gt;.&lt;/p&gt;&lt;h2&gt;How do you measure coupling angular misalignment?&lt;/h2&gt;&lt;p&gt;Use the shaft-alignment method specified for the machine train, such as laser alignment or a dial-indicator method. If the approved procedure uses face-gap readings, take them at opposite points on the same measuring circle. Record the distance between those points and follow the procedure for checking or compensating for face runout. Measure offset independently. For pump installations, see the &lt;a href=&quot;https://www.pumps.org/resources/pump-faqs/&quot;&gt;Hydraulic Institute pump FAQs&lt;/a&gt; for dial-indicator and cold-alignment considerations.&lt;/p&gt;&lt;p&gt;For example, suppose the top and bottom gaps differ by 0.20 mm across a 100 mm measuring diameter. For ideal flat faces and small angles, the angularity in that plane is 0.20 mm per 100 mm. The angle in degrees is approximately arctan(0.20 ÷ 100) × 180 ÷ π, or 0.115°. Use the actual measuring diameter in the calculation and compare the result with the approved limit in the same unit. A reading in mm per 100 mm describes slope. A reading in mm at the coupling plane describes offset.&lt;/p&gt;&lt;h2&gt;Which flexible coupling alignment tolerance applies?&lt;/h2&gt;&lt;p&gt;For acceptance, check the coupling installation instructions and the driver and driven equipment requirements for the exact train. Compare limits only after matching units, reference planes and measurement conditions. For a motor and pump that move as they warm up, the approved cold target may call for a deliberate offset. Resolve conflicting targets with the responsible equipment suppliers before commissioning. See the &lt;a href=&quot;https://www.fluke.com/en-in/learn/blog/alignment/shaft-alignment-tolerance-guide&quot;&gt;shaft alignment tolerance guide&lt;/a&gt;.&lt;/p&gt;&lt;p&gt;For selection, check the coupling’s allowable movement for the exact series and size. Ask the supplier whether the angular, radial and axial limits apply separately and what combination is allowed at your speed, load and duty. Use the expected movements together when asking for confirmation, including any axial travel or end float.&lt;/p&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/xl-star-elastomer-coupling-drawing-01.png&quot; alt=&quot;XL Star Elastomer Coupling drawing with an end view and a section through the hubs and insert&quot; width=&quot;1600&quot; height=&quot;640&quot; style=&quot;max-width:100%;height:auto&quot;/&gt;&lt;figcaption&gt;RONGXING DRIVE XL Star Elastomer Coupling. Use the section view to locate the two faces identified in your approved installation drawing.&lt;/figcaption&gt;&lt;/figure&gt;&lt;p&gt;Use the &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/xl-star-elastomer-coupling.html&quot;&gt;XL model table and assembly drawing&lt;/a&gt; to identify the coupling size and dimensions. Request the approved installation limits for that size if your documents give catalogue dimensions only.&lt;/p&gt;&lt;h2&gt;What should the alignment report include?&lt;/h2&gt;&lt;ol class=&quot; list-paddingleft-2&quot;&gt;&lt;li&gt;&lt;p&gt;Identify the driver, driven equipment, coupling series and size, and applicable document revisions.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Record the method, reference plane, vertical and horizontal angle and offset, plus the axial spacing and its two reference faces.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Record whether the readings were taken cold or at operating condition, along with any approved thermal target. Check soft foot and external strain as specified by the equipment procedure.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Retake the readings after tightening the hold-down bolts to the specified torque. Keep the final readings alongside the applicable limits, with the source of each limit.&lt;/p&gt;&lt;/li&gt;&lt;/ol&gt;&lt;p&gt;For help checking a coupling for your drive, share the series and size or an assembly drawing, both shaft diameters and end details, operating speed, nominal and peak torque, and the expected angular, radial and axial movement. Include the temperature conditions, duty cycle and any available alignment report.&lt;/p&gt;</description><pubDate>Sun, 15 Nov 2026 12:09:13 +0800</pubDate></item><item><title>Gear Coupling Lubrication Checks Before Start-Up</title><link>https://www.shaftdrivecoupling.com/technical-resources/gear-coupling-lubrication-startup-checks.html</link><description>&lt;p&gt;Before operating a gear coupling, confirm the approved lubricant, the fill quantity and units, the filling method and the next service interval for the exact model. Inspect the seals and plugs, then confirm whether the coupling was filled during assembly. For equipment returning to service, check the maintenance record for the product and amount already inside.&lt;/p&gt;&lt;h2&gt;How do you choose gear coupling grease?&lt;/h2&gt;&lt;p&gt;Start with the coupling manufacturer&amp;#39;s lubricant specification and the actual speed, temperature and mounting position. For a grease-lubricated model, check the required consistency, base oil viscosity and resistance to separation under rotation where specified. Two greases with the same NLGI grade can have different base oil viscosities and separation characteristics. If an oil system is specified, follow the oil grade and supply requirements for that design.&lt;/p&gt;&lt;p&gt;Lubricant substitution needs approval for the actual duty. If the existing product is unknown or the new grease has a different formulation, confirm compatibility and the manufacturer&amp;#39;s cleanout or changeover procedure before adding it. General guidance on selection and lubrication methods is available from &lt;a href=&quot;https://members.agma.org/ItemDetail?Category=STANDARDS&amp;iProductCode=9001_C18&quot;&gt;AGMA&amp;#39;s flexible coupling lubrication standard&lt;/a&gt;.&lt;/p&gt;&lt;h2&gt;What does the grease quantity in a catalogue mean?&lt;/h2&gt;&lt;p&gt;Check the exact series and size, then read the entire column heading. Confirm whether the figure applies to the complete coupling or a specified chamber, and whether it refers to the initial fill or a service operation. Rongxing lists GCLD grease by volume and WGZ grease by total mass.&lt;/p&gt;&lt;div style=&quot;overflow-x:auto&quot;&gt;&lt;table style=&quot;border-collapse:collapse;width:100%&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th scope=&quot;col&quot;&gt;Rongxing model&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;Catalogue field&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;Listed quantity&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;GCLD1&lt;/td&gt;&lt;td&gt;Grease quantity&lt;/td&gt;&lt;td&gt;107 mL&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;GCLD2&lt;/td&gt;&lt;td&gt;Grease quantity&lt;/td&gt;&lt;td&gt;137 mL&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;WGZ1&lt;/td&gt;&lt;td&gt;Total grease mass&lt;/td&gt;&lt;td&gt;0.11 kg&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;/div&gt;&lt;p&gt;Use the table for the model on the machine. If a procedure requires a conversion, use the approved lubricant&amp;#39;s density and confirm that both figures refer to the same fill scope. Ask for the model instructions if the quantity table leaves the filling sequence or service interval unclear. &lt;a href=&quot;https://www.shaftdrivecoupling.com/gear-couplings/gcld-crowned-gear-coupling.html&quot;&gt;GCLD model table&lt;/a&gt; · &lt;a href=&quot;https://www.shaftdrivecoupling.com/gear-couplings/wgz-crowned-gear-coupling.html&quot;&gt;WGZ model table&lt;/a&gt;&lt;/p&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/gcld-crowned-gear-coupling-drawing-01.png&quot; alt=&quot;Rongxing GCLD crowned gear coupling assembly drawing&quot; style=&quot;max-width:100%;height:auto&quot;/&gt;&lt;figcaption&gt;Rongxing GCLD assembly drawing. Match the installed arrangement to the drawing and get the filling instructions for that model.&lt;/figcaption&gt;&lt;/figure&gt;&lt;h2&gt;What should the start-up record contain?&lt;/h2&gt;&lt;ul class=&quot; list-paddingleft-2&quot;&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Identification.&lt;/strong&gt; Record the series, size, arrangement, mounting orientation and drawing or manual revision.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Lubricant and fill.&lt;/strong&gt; Record the approved product or specification, quantity, unit and the location or chambers to which it applies. Note the fill actually used and whether the assembly arrived prefilled.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Method and condition.&lt;/strong&gt; Confirm the instructions for filling and venting where applicable. Inspect the specified seals, plugs and fittings for damage or leakage. If grease has escaped, check where it leaked before topping up.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Service schedule.&lt;/strong&gt; Record the next inspection and relubrication due date or operating hours. Check whether the manufacturer&amp;#39;s schedule changes with speed, temperature, contamination or duty.&lt;/p&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;For a new installation or a coupling that has been opened, verify the installation gap and alignment against the approved tolerances as part of the start-up check. &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/gear-coupling-gap-chart-alignment.html&quot;&gt;Gear coupling gap and alignment guide&lt;/a&gt;&lt;/p&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;</description><pubDate>Sat, 14 Nov 2026 19:13:20 +0800</pubDate></item><item><title>How to Read a Gear Coupling Gap Chart and Check Alignment</title><link>https://www.shaftdrivecoupling.com/technical-resources/gear-coupling-gap-chart-alignment.html</link><description>&lt;p&gt;To confirm a gear coupling installation gap, identify the series, size and assembly arrangement. Use the approved drawing or installation manual to find the specified distance, the two faces it is measured between and its tolerance. Record the actual hub positions and any shaft end float or thermal movement that can change the distance in service. Confirm shaft alignment separately.&lt;/p&gt;&lt;h2&gt;Which gap should you look up?&lt;/h2&gt;&lt;p&gt;Match the series and size to the chart row, then check where the drawing puts the measurement faces. A shaft-end reading can differ from a hub-face reading when the hubs sit proud of or behind the shaft ends. A spacer arrangement can introduce another pair of reference faces.&lt;/p&gt;&lt;div style=&quot;overflow-x:auto&quot;&gt;&lt;table style=&quot;border-collapse:collapse;width:100%&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th scope=&quot;col&quot;&gt;Dimension or reading&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;What to identify before using it&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;Hub-face gap&lt;/td&gt;&lt;td&gt;Identify the two hub faces called out on the drawing and the installed position of each hub on its shaft.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Distance between shaft ends&lt;/td&gt;&lt;td&gt;Identify the actual shaft ends. Check whether the drawing defines this distance directly and whether it applies to the selected assembly.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Spacer or intermediate member dimension&lt;/td&gt;&lt;td&gt;Check the spacer length and the drawing reference faces for the complete arrangement. Record which faces remain accessible with the spacer in place.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Gap variation around the faces&lt;/td&gt;&lt;td&gt;If the specified method uses face-gap readings for angular alignment, record the positions and measuring diameter. Use the specified alignment method to verify parallel offset.&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;/div&gt;&lt;h2&gt;How to use the Rongxing GICL drawing with the chart&lt;/h2&gt;&lt;p&gt;The Rongxing GICL assembly drawing shows &lt;strong&gt;C&lt;/strong&gt; at the centre of the assembly. Read the arrow endpoints with the drawing and use the table for the exact model. The GICL catalogue also includes configuration details with &lt;strong&gt;C₁&lt;/strong&gt; and &lt;strong&gt;C₂&lt;/strong&gt;. Confirm which detail applies to the ordered bore and hub arrangement before using a table value. Ask for the installation tolerance and setting condition if the assembly document does not state them.&lt;/p&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/gicl-crowned-gear-coupling-drawing-01.png&quot; alt=&quot;Rongxing GICL sectional assembly drawing showing C callouts at the centre and L at both hubs&quot; style=&quot;max-width:100%;height:auto&quot;/&gt;&lt;figcaption&gt;Rongxing GICL sectional drawing. Use the dimension arrows to identify the measurement faces before selecting the relevant table entry.&lt;/figcaption&gt;&lt;/figure&gt;&lt;p&gt;Use the &lt;a href=&quot;https://www.shaftdrivecoupling.com/gear-couplings/gicl-crowned-gear-coupling.html&quot;&gt;GICL product drawing and model table&lt;/a&gt; to identify the assembly. If you still need to identify the size from bore or outside diameter, start with the &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/gear-coupling-size-chart.html&quot;&gt;GICL gear coupling size chart&lt;/a&gt;.&lt;/p&gt;&lt;h2&gt;How does the installation gap relate to gear coupling alignment?&lt;/h2&gt;&lt;p&gt;The axial gap sets the separation between the specified faces. Angular alignment checks the angle between the shaft centre lines, and parallel alignment checks their offset. A set of face-gap readings can show variation around the coupling when the approved method calls for it. Even readings can occur with parallel offset, so check offset with the specified dial indicator or laser method as well.&lt;/p&gt;&lt;p&gt;Use the installation limits specified for the coupling and driven equipment. A catalogue limit for coupling movement in service does not establish the acceptable alignment at installation. If the equipment has a cold alignment target or a defined running position, record the target and the position in which the readings were taken.&lt;/p&gt;&lt;h2&gt;What information is needed to confirm a gear coupling installation gap?&lt;/h2&gt;&lt;ul class=&quot; list-paddingleft-2&quot;&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Coupling identity:&lt;/strong&gt; series, size, drawing number and revision, plus any spacer, hub orientation or special hub arrangement.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Dimensions and datums:&lt;/strong&gt; mark the reference faces on a drawing or photo. Give the specified gap and tolerance in mm, measured gap in mm, shaft-end distance where relevant and the installed position of each hub.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Equipment condition:&lt;/strong&gt; record whether readings were taken cold, and how each shaft was positioned within any axial end float. Include expected axial thermal movement or the equipment maker&amp;#39;s cold setting when available.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Alignment report:&lt;/strong&gt; include the method, any face-gap readings with their positions and measuring diameter, and the measured angular and parallel alignment against the applicable limits.&lt;/p&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;If the site reports a gap of 4 mm, first establish where it was measured. A 4 mm reading between the shaft ends cannot verify a 4 mm hub-face requirement unless the drawing and installed hub positions establish that the reference planes coincide. Use the approved specification to decide whether the measured gap is acceptable.&lt;/p&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;</description><pubDate>Thu, 12 Nov 2026 23:40:57 +0800</pubDate></item><item><title>Jaw Coupling Spider Inserts: Types, Sizes and Replacement</title><link>https://www.shaftdrivecoupling.com/technical-resources/jaw-coupling-spider-insert-types-sizes-replacement.html</link><description>&lt;p&gt;Choose a jaw coupling spider by matching the coupling series, size and insert profile first. Then confirm the specified material and hardness for the operating duty. The spider is the resilient insert between the two hubs. Shaft bore and coupling outside diameter help identify the assembly, but the insert must match the shape and spacing of the jaws.&lt;/p&gt;&lt;h2&gt;How do I choose the correct spider insert for an industrial jaw coupling?&lt;/h2&gt;&lt;p&gt;Look for a manufacturer and size marking on both hubs and the old insert. Photograph the hub faces, then compare the jaw profile, lobe count and shape with the assembly drawing. If the markings are unreadable, measure the insert outside diameter, axial thickness and centre opening where applicable. Include a photo of the insert face and side. Use the old part as a clue, since wear or swelling can change its dimensions.&lt;/p&gt;&lt;div style=&quot;overflow-x:auto&quot;&gt;&lt;table&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th scope=&quot;col&quot;&gt;Feature&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;What to check&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;Straight or curved jaw profile&lt;/td&gt;&lt;td&gt;Compare the insert lobes with the spaces between the hub jaws. An equal lobe count does not establish a match.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Solid or wrap-style insert&lt;/td&gt;&lt;td&gt;Check the assembly drawing for the removal direction and any retaining ring or sleeve. Some wrap designs allow radial removal if there is enough working clearance.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Material and hardness&lt;/td&gt;&lt;td&gt;Match the approved grade or ask the supplier to confirm an alternative for the duty. Colour conventions can differ between series and manufacturers.&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;/div&gt;&lt;p&gt;For more detail on hub and insert geometry, see the &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/jaw-coupling-types.html&quot;&gt;jaw coupling types guide&lt;/a&gt;.&lt;/p&gt;&lt;h2&gt;How do you read a spider or star coupling size chart?&lt;/h2&gt;&lt;p&gt;First check whether the chart lists the complete coupling or the spare insert. A complete coupling chart can list shaft bores, torque and assembly dimensions. An insert chart or spare-part drawing identifies the geometry and reference of the replaceable element. Use the assembly chart to identify the coupling and the spare-part drawing to match the insert.&lt;/p&gt;&lt;div style=&quot;overflow-x:auto&quot;&gt;&lt;table&gt;&lt;caption&gt;Rongxing XL Star Elastomer Coupling chart excerpt for assembly identification&lt;/caption&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th scope=&quot;col&quot;&gt;XL assembly size&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;Nominal torque Tn (N·m)&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;Catalogue permissible speed (r/min)&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;Assembly drawing dimension D (mm)&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;XL1&lt;/td&gt;&lt;td&gt;34&lt;/td&gt;&lt;td&gt;19,000&lt;/td&gt;&lt;td&gt;40&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;XL2&lt;/td&gt;&lt;td&gt;120&lt;/td&gt;&lt;td&gt;14,000&lt;/td&gt;&lt;td&gt;55&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;XL3&lt;/td&gt;&lt;td&gt;320&lt;/td&gt;&lt;td&gt;11,800&lt;/td&gt;&lt;td&gt;65&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;XL4&lt;/td&gt;&lt;td&gt;650&lt;/td&gt;&lt;td&gt;9,500&lt;/td&gt;&lt;td&gt;80&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;XL5&lt;/td&gt;&lt;td&gt;900&lt;/td&gt;&lt;td&gt;8,000&lt;/td&gt;&lt;td&gt;95&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;/div&gt;&lt;p&gt;For example, 65 mm is dimension D on the XL3 assembly drawing. The spider outside diameter needs its own specification. Use the &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/xl-star-elastomer-coupling.html&quot;&gt;full Rongxing XL drawing and table&lt;/a&gt; for bore options and assembly dimensions, then ask for the insert reference. Rongxing &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/ml-jaw-coupling.html&quot;&gt;ML Jaw Couplings&lt;/a&gt; have a separate model table and drawing. Check interchangeability against the two drawings and the supplier&amp;#39;s part records. Catalogue torque and speed values are separate entries. Confirm that the selected coupling and insert suit the actual combination of load, speed and movement.&lt;/p&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/xl-star-elastomer-coupling-drawing-01.png&quot; alt=&quot;Rongxing XL Star Elastomer Coupling assembly drawing showing both hubs, the centre element and dimension D&quot; style=&quot;max-width:100%;height:auto&quot;/&gt;&lt;figcaption&gt;Rongxing XL assembly drawing. Read the dimension letters with the XL model table.&lt;/figcaption&gt;&lt;/figure&gt;&lt;h2&gt;What information is needed before replacing the elastomer in a jaw coupling?&lt;/h2&gt;&lt;p&gt;Send enough information for the supplier to check both fit and material. If you have the original drawing, mark the installed hub spacing on it.&lt;/p&gt;&lt;ul class=&quot; list-paddingleft-2&quot;&gt;&lt;li&gt;&lt;p&gt;Manufacturer, coupling series and size, readable insert reference, and photos of both hub faces and the old insert&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Hub spacing, insert outside diameter, thickness and centre opening in mm where applicable&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Operating speed in r/min, normal and peak torque in N·m if known, and any frequent starts, reversals or shocks&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Temperature at the coupling and any oil or process-fluid exposure&lt;/p&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;Before reusing the hubs, check for damaged jaws, loose fit or signs that the hubs have touched. If an insert has failed repeatedly, compare the installed gap and alignment with the original instructions and review the actual duty. Confirm the part reference, compound and installation method against the drawing before fitting the replacement.&lt;/p&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;</description><pubDate>Thu, 12 Nov 2026 13:51:12 +0800</pubDate></item><item><title>Industrial Rubber and Elastomeric Coupling Types</title><link>https://www.shaftdrivecoupling.com/technical-resources/industrial-rubber-elastomeric-coupling-types.html</link><description>&lt;p&gt;An elastomeric coupling connects two rotating shafts and transmits torque through a resilient element. Jaw couplings use a spider between the hubs, tyre couplings use a flexible ring, and some pin couplings use resilient bushes or sleeves. In industrial purchasing, “rubber coupling” often refers to one of these designs. The term also appears in pipe fitting catalogues, so specify &lt;em&gt;shaft coupling&lt;/em&gt; and give the series if you know it.&lt;/p&gt;&lt;p&gt;Elastomer describes a class of materials. A coupling element may be made from a rubber compound or another elastomer, such as a grade of polyurethane. Ask for the compound specified for that series and size. Check how it handles the load, temperature and fluids around the drive.&lt;/p&gt;&lt;h2&gt;How do jaw, tyre and pin bush couplings differ?&lt;/h2&gt;&lt;div style=&quot;overflow-x:auto&quot;&gt;&lt;table style=&quot;width:100%;border-collapse:collapse&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th scope=&quot;col&quot;&gt;Design&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;How it carries torque&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;What to check on the drawing&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;Jaw coupling&lt;/td&gt;&lt;td&gt;The jaws on the two hubs load a matching elastomer spider.&lt;/td&gt;&lt;td&gt;Compare the jaw profile, spider shape and hub spacing. Check whether the element comes out radially or requires room to separate the hubs.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Tyre coupling&lt;/td&gt;&lt;td&gt;A flexible tyre-shaped element carries torque between the two sides of the coupling.&lt;/td&gt;&lt;td&gt;Check the tyre section, retaining arrangement, flange spacing and clearance around the element.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Pin bush or sleeve pin coupling&lt;/td&gt;&lt;td&gt;The pins and their resilient bushes or sleeves transfer load between the flanges.&lt;/td&gt;&lt;td&gt;Check the sleeve and pin dimensions, retention and access to withdraw the pins or sleeves.&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;/div&gt;&lt;p&gt;The &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/xl-star-elastomer-coupling.html&quot;&gt;Rongxing XL Star Elastomer Coupling&lt;/a&gt; shows the spider between the jaws. The &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/ul-tire-coupling.html&quot;&gt;Rongxing UL Tire Coupling&lt;/a&gt; uses a different element geometry. The &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings/tl-flexible-sleeve-pin-coupling.html&quot;&gt;Rongxing TL Flexible Sleeve Pin Coupling&lt;/a&gt; shows where the sleeves sit on the pins. Use each product drawing with its own model table.&lt;/p&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/ul-tire-coupling-drawing-01.png&quot; alt=&quot;Rongxing UL Tire Coupling drawing showing the tyre element and the two shaft connections&quot; style=&quot;max-width:100%;height:auto&quot;/&gt;&lt;figcaption&gt;Rongxing UL drawing. Match the tyre and its mounting details to the model before ordering a replacement.&lt;/figcaption&gt;&lt;/figure&gt;&lt;h2&gt;How do you identify a flexible coupling element for replacement?&lt;/h2&gt;&lt;p&gt;Start with the coupling series and size, then match the element to its drawing or part number. A shaft bore tells you how the hub fits the shaft. To match the element, you also need its profile and dimensions, and the specified grade for the duty.&lt;/p&gt;&lt;ol class=&quot; list-paddingleft-2&quot;&gt;&lt;li&gt;&lt;p&gt;Photograph the whole assembly and any markings on the hubs and element. Include a clear view of the interface that holds the element in place.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;For a jaw spider, check the profile, lobe count and thickness. For a tyre, check the section and the way the edges are held. For a pin bush, measure the inside diameter, outside diameter and length in mm, and identify the mating pin.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Compare your measurements with the drawing. A worn or swollen element may have changed shape. Ask the supplier to confirm the part number, compound and specified hardness for your model. Colour alone is an unreliable match across product ranges.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Inspect the mating hubs, retaining parts and pins before ordering. If those parts are damaged, ask whether they can be replaced separately or whether the assembly needs replacement.&lt;/p&gt;&lt;/li&gt;&lt;/ol&gt;&lt;figure&gt;&lt;img src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/xl-star-elastomer-coupling-drawing-01.png&quot; alt=&quot;Rongxing XL Star Elastomer Coupling drawing with two hubs and the spider between them&quot; style=&quot;max-width:100%;height:auto&quot;/&gt;&lt;figcaption&gt;Rongxing XL drawing. The spider must match the jaw profile and the assembled spacing.&lt;/figcaption&gt;&lt;/figure&gt;&lt;h2&gt;What should you check when selecting a complete coupling?&lt;/h2&gt;&lt;p&gt;For a motor driving a pump, use the transmitted torque and speed at the coupling, including starting or peak duty where relevant. Give the supplier the shaft bores and keyways, the available installation space and the expected angular, parallel and axial movement. Ask for the permissible combination of movement, torque and speed for the selected size. Align the machines to the equipment makers’ requirements.&lt;/p&gt;&lt;p&gt;Check the temperature at the coupling and any exposure to oil or process fluids. Check how the spare comes out before choosing the design. A guard or bearing housing can leave too little room to withdraw an element. For a pump installation, see the &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/pin-bush-vs-jaw-coupling-industrial-pump.html&quot;&gt;pin bush and jaw coupling comparison&lt;/a&gt;.&lt;/p&gt;&lt;h2&gt;What should a buyer in India ask a coupling supplier to confirm?&lt;/h2&gt;&lt;p&gt;Specify whether you need a complete coupling or only the flexible element. Include the machine type, model markings, drawings or photographs, operating speed in r/min and transmitted torque in N·m if known. For a replacement, ask for the exact element reference and written confirmation of fit. For a complete assembly, ask for the proposed model and bore details, then confirm the availability of spares and delivery terms for your location.&lt;/p&gt;&lt;p&gt;Use the &lt;a href=&quot;https://www.shaftdrivecoupling.com/flexible-couplings&quot;&gt;Rongxing flexible coupling range&lt;/a&gt; to find the relevant product family and drawing.&lt;/p&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;</description><pubDate>Wed, 11 Nov 2026 22:26:17 +0800</pubDate></item><item><title>Cardan Shaft Parts, Working Principle and Industrial Uses</title><link>https://www.shaftdrivecoupling.com/technical-resources/cardan-shaft-parts-working-principle-uses.html</link><description>&lt;p&gt;A Cardan shaft transmits torque between machines whose shaft axes are at an angle to the intermediate shaft. A typical industrial assembly has a universal joint at each end, an intermediate member and two machine connections. A telescopic version adds a sliding spline to accommodate changes in length. Start with the assembly drawing if you need to identify a part or replace a shaft: the same model family can include several joint sizes, lengths and flange patterns.&lt;/p&gt;&lt;h2&gt;Cardan shaft parts and what they do&lt;/h2&gt;&lt;table style=&quot;width:100%;border-collapse:collapse&quot;&gt;&lt;thead&gt;&lt;tr class=&quot;firstRow&quot;&gt;&lt;th scope=&quot;col&quot;&gt;Part name&lt;/th&gt;&lt;th scope=&quot;col&quot;&gt;Function and identification&lt;/th&gt;&lt;/tr&gt;&lt;/thead&gt;&lt;tbody&gt;&lt;tr&gt;&lt;td&gt;End flange or flange yoke&lt;/td&gt;&lt;td&gt;Connects to a machine flange. A flange yoke also carries one pair of bearings. Check the mounting face, pilot and bolt pattern at each end.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Yoke or fork&lt;/td&gt;&lt;td&gt;Holds one opposing pair of bearings around the cross. The position of the yokes on the intermediate shaft determines the relative joint phase.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Cross, spider or journal cross&lt;/td&gt;&lt;td&gt;Transfers torque between the yokes through four trunnions. Match the cross and its bearing arrangement to the joint series.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Bearing cups, seals and retainers&lt;/td&gt;&lt;td&gt;Support and protect the trunnions and keep the bearing assembly in place. Retention and lubrication details depend on the design.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Intermediate member&lt;/td&gt;&lt;td&gt;Carries torque between the joints. It may be a tube or another shaft construction. Its length, stiffness and mass matter when checking operating speed.&lt;/td&gt;&lt;/tr&gt;&lt;tr&gt;&lt;td&gt;Sliding spline, where fitted&lt;/td&gt;&lt;td&gt;Transmits torque while allowing axial movement. Use the approved drawing to check usable stroke and engagement at the installed extremes.&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;&lt;/table&gt;&lt;figure&gt;&lt;img loading=&quot;lazy&quot; style=&quot;max-width:100%;height:auto&quot; src=&quot;https://www.shaftdrivecoupling.com/zb_users/theme/rongxingdrive/style/images/products/swc-bh-telescopic-welded-cardan-shaft-drawing-01.png&quot; alt=&quot;Rongxing SWC-BH telescopic Cardan shaft drawing showing end flanges and the intermediate shaft&quot;/&gt;&lt;figcaption&gt;Example: Rongxing SWC-BH telescopic welded Cardan shaft. Use the drawing to locate the end connections and intermediate assembly; confirm dimensions against the drawing for the specific size ordered.&lt;/figcaption&gt;&lt;/figure&gt;&lt;h2&gt;How does a Cardan shaft work?&lt;/h2&gt;&lt;p&gt;Torque passes from the driving flange through the first joint, along the intermediate member and through the second joint to the driven flange. The joints let the shaft articulate. In a telescopic design, the spline also slides to accommodate a change in distance between the machine connections. Measure the joint angles separately from the change in length.&lt;/p&gt;&lt;p&gt;A single Cardan joint running at an angle produces cyclic speed variation. For a coplanar two-joint layout, equal true joint angles and the specified yoke phase allow the second joint to cancel that variation at the output in the ideal geometry. Check both angles across the machine&amp;#39;s travel. As an example, a layout measured at 5° at both joints in one position could change to 5° at one joint and 8° at the other. In the second position, exact cancellation no longer applies. These angles illustrate the geometry; they are not recommended operating limits. See the &lt;a href=&quot;https://digitalcommons.njit.edu/fac_pubs/17505/&quot;&gt;published kinematic study on two Cardan joints&lt;/a&gt; for the relationship between joint angles and phase.&lt;/p&gt;&lt;h2&gt;Where are industrial Cardan shafts used?&lt;/h2&gt;&lt;p&gt;A rolling mill can use a Cardan shaft between a gearbox and a roll when the connection geometry calls for articulation. If roll adjustment changes the distance between flanges, the designer also needs to check axial travel. A fixed-length shaft can be considered where the installed distance stays within the arrangement&amp;#39;s permitted movement. The &lt;a href=&quot;https://www.shaftdrivecoupling.com/cardan-shafts/swc-bh-telescopic-welded-cardan-shaft.html&quot;&gt;Rongxing SWC-BH&lt;/a&gt; and &lt;a href=&quot;https://www.shaftdrivecoupling.com/cardan-shafts/swc-wf-non-telescopic-flanged-cardan-shaft.html&quot;&gt;SWC-WF&lt;/a&gt; illustrate telescopic and non-telescopic layouts respectively. Check the ratings for the size and installation you intend to use.&lt;/p&gt;&lt;h2&gt;What matters in Cardan shaft design and material selection?&lt;/h2&gt;&lt;p&gt;Start with the duty: steady and peak torque, reversals, speed range, both joint angles and the minimum and maximum installed lengths. Review the operating speed against the approved limits for the actual shaft length and configuration. Include the flange fit, access for maintenance and any balancing requirement. The &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/industrial-cardan-shaft-sizing-and-selection-guide.html&quot;&gt;industrial Cardan shaft sizing guide&lt;/a&gt; covers the next stage of model selection.&lt;/p&gt;&lt;p&gt;Ask for the material designation and applicable heat treatment by part: cross, yokes, intermediate member, spline and flanges. A single material description for the complete shaft does not identify the wear surfaces or establish the fatigue capacity. If the order specifies traceability or a material certificate, agree which parts and batches it will cover. Use the approved bill of materials and drawing for that assembly to confirm the specification.&lt;/p&gt;&lt;h2&gt;What should I record when identifying an existing assembly?&lt;/h2&gt;&lt;ol class=&quot; list-paddingleft-2&quot;&gt;&lt;li&gt;&lt;p&gt;Record the manufacturer, model, drawing revision and any assembly or match marks. Specify whether you need a complete shaft or only a service part.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Measure installed length between the stated datums. For a telescopic shaft, note the shortest and longest positions seen in service, and ask the manufacturer to confirm usable travel and spline engagement.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Record both end interfaces separately. The pilot diameter and depth, bolt count, pitch circle diameter, hole dimensions and available tool clearance are useful starting points. Use the &lt;a href=&quot;https://www.shaftdrivecoupling.com/technical-resources/industrial-cardan-shaft-flange-bolt-pattern-dimensions.html&quot;&gt;Cardan shaft flange and bolt-pattern guide&lt;/a&gt; for the full drawing checklist.&lt;/p&gt;&lt;/li&gt;&lt;li&gt;&lt;p&gt;Send a sketch of the drive layout and the operating duty with the dimensions. A shaft that fits between the mounting faces still needs approval for the actual combination of load, speed and angle.&lt;/p&gt;&lt;/li&gt;&lt;/ol&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;</description><pubDate>Wed, 11 Nov 2026 22:09:44 +0800</pubDate></item></channel></rss>