Cardan Shafts

Large SWC-WF Non-Telescopic Flanged Cardan Shaft

Large SWC-WF Non-Telescopic Flanged Cardan Shaft with model-specific technical data, engineering context and assembly drawing for preliminary selection.

Last updated

Product Overview

Large SWC-WF is the non-telescopic flanged large-size cardan shaft. The model table presents angle-specific minimum and working lengths together with rated and fatigue torque, allowing an engineer to compare a fixed flange layout with the available machine envelope. The published title is controlled as non-telescopic flanged. The published model tables contain 7 size rows and provide torque values spanning 1400–8000 N·m, operating-angle values spanning 5–10 °. Use those values for preliminary comparison only; final materials, current standards, manufacturing details and operating suitability require confirmation from RONGXING DRIVE.

Key Features

  • Large non-telescopic flanged shaft layout
  • Angle-specific length values for 5° and 10° conditions
  • Separate rated and fatigue torque values
  • The model data provides torque values spanning 1400–8000 N·m, operating-angle values spanning 5–10 ° for a traceable preliminary comparison.

Typical Selection Context

  • Large flanged drive lines with a fixed shaft length
  • Metallurgy, mining and process equipment requiring a robust flange interface

Technical Specification

The following model tables are provided for preliminary comparison. Keep the relevant assembly drawing with the selected row.

ModelSwing diameter D (mm)Rated torque Tn (kN·m)Fatigue torque Tf (kN·m)Operating angle β≤Dimensions (mm) Lₘᵢₙ β=5°Dimensions (mm) Lₘᵢₙ β=10°Dimensions (mm) D₁ (js11)Dimensions (mm) D₂Dimensions (mm) D₃Dimensions (mm) Lₘ β=5°Dimensions (mm) Lₘ β=10°Dimensions (mm) n-dDimensions (mm) k
SWC680WF68014007105°;10°1840194063555050833536024-2555
SWC780WF78025001250
1980212072564063037040524-3162
SWC840WF84031501600
2200242077571066042548024-3870
SWC920WF92040002000
2340242085576075046048024-3880
SWC1000WF100050002500
2560264091584079051553520-5090
SWC1100WF110063103150
28803200101592085057060020-50100
SWC1200WF120080004000
308032401100100090062066020-58110

Engineering Context

This model is best understood from its own construction: Large non-telescopic flanged shaft layout; Angle-specific length values for 5° and 10° conditions; Separate rated and fatigue torque values Industry selection practice checks torque and speed together with the movement, shaft interface, installation envelope and maintenance conditions allowed by that construction.

Technical Notes

  • Model symbols, units and empty or placeholder cells are shown as published.

  • Dimension letters must be interpreted with the relevant assembly drawing.

  • Published values support preliminary review and do not replace final engineering confirmation.

Assembly Drawing

Large SWC-WF Non-Telescopic Flanged Cardan Shaft assembly drawing
Use this assembly drawing together with the selected model row. Dimension symbols and connection details are drawing-specific; confirm final installation dimensions before manufacture or installation.

Information Required for Selection

  • Confirm flange pilot, bolt pattern, phasing and fixed length
  • Use the angle-specific length row and fatigue torque for cyclic duty
  • Send the exact model row, assembly drawing and actual duty data with the inquiry.

Product FAQ

Why are two minimum lengths listed?

The table distinguishes installation dimensions at different operating-angle conditions.

What is the first interface check?

Match the flange pilot and bolt circle before comparing torque and swing diameter.

Are the published values final ordering values?

No. They are preliminary engineering data; confirm the selected model, drawing, dimensions, materials, standard and suitability with RONGXING DRIVE.

Technical data is provided for preliminary selection. Confirm the final model, dimensions, materials, applicable standard and operating suitability with RONGXING DRIVE before quotation, manufacture or installation.

Request engineering support

Ask About Large SWC-WF Non-Telescopic Flanged Cardan Shaft

The product field is filled automatically. Add the available torque, speed, shaft, installation and operating-condition data for a useful first review.

Do not include passwords, payment details or unrelated personal information.

Continue browsing

Review other currently published product pages before preparing the inquiry.

Comments

Diana

5/5

SWC285WF units on our steel processing line have completed 14 months of operation. The fixed-length design is simpler to align than telescopic variants, and the flange connection makes removal for maintenance straightforward. Flange face runout has remained within tolerance. We are currently in discussion with Rongxing about SWC315WF units for a new slitting line. hoping the same build quality carries over to the larger size.

Leave a Comment

Questions and practical feedback are welcome. Comments are reviewed before publication.

Your rating will be published with your comment after approval.
Verification code