Cardan Shafts
SWC-WH Non-Telescopic Welded Cardan Shaft
SWC-WH Non-Telescopic Welded Cardan Shaft with model-specific technical data, engineering context and assembly drawing for preliminary selection.
Product Overview
SWC-WH is a non-telescopic welded cardan shaft with a fixed installed geometry. Its model rows combine swing diameter, rated and fatigue torque, operating angle and welded-end dimensions. The absence of telescopic travel makes accurate shaft-span measurement and phasing especially important before a size is requested. The published model tables contain 13 size rows and provide torque values spanning 1.25–710 N·m, operating-angle values spanning 15–25 °. Use those values for preliminary comparison only; final materials, current standards, manufacturing details and operating suitability require confirmation from RONGXING DRIVE.
Key Features
- Fixed-length welded cardan-shaft configuration
- Rated and fatigue torque support normal and cyclic-duty review
- Operating angle and swing diameter are drawing-linked
- The model data provides torque values spanning 1.25–710 N·m, operating-angle values spanning 15–25 ° for a traceable preliminary comparison.
Typical Selection Context
- Fixed-span welded drive lines for rolling and process equipment
- Angled shaft connections where compact fixed geometry is preferred
Technical Specification
The following model tables are provided for preliminary comparison. Keep the relevant assembly drawing with the selected row.
| Model | Swing diameter D (mm) | Rated torque Tn (kN·m) | Fatigue torque Tf (kN·m) | Operating angle β (°) | Dimensions (mm) Lₘᵢₙ | Dimensions (mm) D₁ (js11) | Dimensions (mm) D₂ (H7) | Dimensions (mm) D₃ | Dimensions (mm) Lₘ | Dimensions (mm) n-d | Dimensions (mm) k | Dimensions (mm) t | Dimensions (mm) b (h9) | Dimensions (mm) g | Mass moment of inertia (kg·m²) Lₘᵢₙ | Mass moment of inertia (kg·m²) per 100 mm increase | Mass (kg) Lₘᵢₙ | Mass (kg) per 100 mm increase |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SWC100WH | 100 | 1.25 | 0.63 | ≤25 | 243 | 84 | 57 | 60 | 55 | 6-9 | 7 | 2.5 | - | - | 0.0039 | 0.000199 | 4.5 | 0.35 |
| SWC120WH | 120 | 2.5 | 1.25 | ≤25 | 307 | 102 | 75 | 70 | 65 | 8-11 | 8 | 2.5 | - | - | 0.0096 | 0.00044 | 7.7 | 0.55 |
| SWC150WH | 150 | 5 | 2.5 | ≤25 | 350 | 130 | 90 | 89 | 80 | 8-13 | 10 | 3 | - | - | 0.0371 | 0.001577 | 18 | 0.85 |
| SWC180WH | 180 | 12.5 | 6.3 | ≤25 | 480 | 155 | 105 | 114 | 110 | 8-17 | 17 | 5 | - | - | 0.1500 | 0.00700 | 48 | 2.8 |
| SWC225WH | 225 | 40 | 20 | ≤15 | 520 | 196 | 135 | 152 | 120 | 8-17 | 20 | 5 | 32 | 9.0 | 0.3650 | 0.0234 | 78 | 4.9 |
| SWC250WH | 250 | 63 | 31.5 | ≤15 | 620 | 218 | 150 | 168 | 140 | 8-19 | 25 | 6 | 40 | 12.5 | 0.8470 | 0.0277 | 124 | 5.3 |
| SWC285WH | 285 | 90 | 45 | ≤15 | 720 | 245 | 170 | 194 | 160 | 8-21 | 27 | 7 | 40 | 15.0 | 1.7560 | 0.0510 | 185 | 6.3 |
| SWC315WH | 315 | 125 | 63 | ≤15 | 805 | 280 | 185 | 219 | 180 | 10-23 | 32 | 8 | 40 | 15.0 | 2.8930 | 0.0795 | 262 | 8.0 |
| SWC350WH | 350 | 180 | 90 | ≤15 | 875 | 310 | 210 | 267 | 194 | 10-23 | 35 | 8 | 50 | 16.0 | 5.0130 | 0.2219 | 374 | 15.0 |
| SWC390WH | 390 | 250 | 125 | ≤15 | 955 | 345 | 235 | 267 | 215 | 10-25 | 40 | 8 | 70 | 18.0 | 8.4060 | 0.2219 | 506 | 15.0 |
| SWC440WH | 440 | 355 | 180 | ≤15 | 1155 | 390 | 255 | 325 | 260 | 16-28 | 42 | 10 | 80 | 20.0 | 15.790 | 0.4744 | 790 | 21.7 |
| SWC490WH | 490 | 500 | 250 | ≤15 | 1205 | 435 | 275 | 325 | 270 | 16-31 | 47 | 12 | 90 | 22.5 | 26.540 | 0.4744 | 1014 | 21.7 |
| SWC550WH | 550 | 710 | 355 | ≤15 | 1355 | 492 | 320 | 426 | 305 | 16-31 | 50 | 12 | 100 | 22.5 | 48.320 | 1.3570 | 1526 | 34.0 |
Engineering Context
This model is best understood from its own construction: Fixed-length welded cardan-shaft configuration; Rated and fatigue torque support normal and cyclic-duty review; Operating angle and swing diameter are drawing-linked Industry selection practice checks torque and speed together with the movement, shaft interface, installation envelope and maintenance conditions allowed by that construction.
Technical Notes
- Model symbols, units and empty or placeholder cells are shown as published.
- Dimension letters must be interpreted with the relevant assembly drawing.
- Published values support preliminary review and do not replace final engineering confirmation.
Assembly Drawing
Information Required for Selection
- Measure shaft span, angle, phasing and welded-end details
- Check swing clearance, speed, rated torque and fatigue torque
- Send the exact model row, assembly drawing and actual duty data with the inquiry.
Product FAQ
What is the main installation constraint for SWC-WH?
The fixed shaft length must match the machine span while preserving angle and guard clearance.
What should be sent with a WH inquiry?
Send the drawing interface, installed length, operating angle, speed and torque duty.
Are the published values final ordering values?
No. They are preliminary engineering data; confirm the selected model, drawing, dimensions, materials, standard and suitability with RONGXING DRIVE.
Technical data is provided for preliminary selection. Confirm the final model, dimensions, materials, applicable standard and operating suitability with RONGXING DRIVE before quotation, manufacture or installation.
