Gear Couplings

GSL-Z Telescopic Crowned Gear Coupling, Standard Mounting

GSL-Z Telescopic Crowned Gear Coupling, Standard Mounting with model-specific technical data, engineering context and assembly drawing for preliminary selection.

Last updated

Product Overview

GSL-Z is the standard-mounted telescopic GSL universal-joint configuration. The table gives nominal torque, operating angle, overall and minimum lengths, length compensation and trunnion dimensions. Use the standard mounting drawing to confirm orientation, shaft phasing and clearance before comparing the available size rows. The published model tables contain 34 size rows and provide torque values spanning 31.5–1600 N·m, operating-angle values spanning 1.5 °. Use those values for preliminary comparison only; final materials, current standards, manufacturing details and operating suitability require confirmation from RONGXING DRIVE.

Key Features

  • Standard-mounted telescopic universal-joint arrangement
  • Length compensation paired with operating-angle data
  • Trunnion dimensions define the machine-side interface
  • The model data provides torque values spanning 31.5–1600 N·m, operating-angle values spanning 1.5 ° for a traceable preliminary comparison.

Typical Selection Context

  • Angled drive lines with standard mounting access
  • Heavy process or rolling equipment where shaft length varies during operation

Technical Specification

The following model tables are provided for preliminary comparison. Keep the relevant assembly drawing with the selected row.

ModelNominal torque Tn kN·mOperating angle βOverall dimensions L₁Overall dimensions L₂Overall dimensions L₃Overall dimensions L₄Overall dimensions L₅Overall dimensions LminOverall dimensions D₁Overall dimensions D₂ (h8)Overall dimensions D₃Overall dimensions D₄Overall dimensions D₅Length compensation STrunnion dimensions d₁ (f8)Trunnion dimensions l₁Trunnion dimensions l₂Trunnion dimensions d₁×H1
GSL-Z20031.5≤1.5°9025050801907102002001708820050040200345M20×35
GSL-Z25050
1052806090195780250258220105250
45270425M20×35
GSL-Z28580
11531560105205850285270245120270
50278442M20×40
GSL-Z300100
1153156210820585530028025012428060050292487M24×45
GSL-Z335140
13036065135235975335330280150300
55293488M24×45
GSL-Z355180
130360751452451005355350310174330
55312505M24×45
GSL-Z390224
140390801552551070390380335180360
60360570M24×50
GSL-Z405250
140390801552551070405400340194390
60390580M24×45
GSL-Z440315
150430851652601140440440375208410
65420650M24×45
GSL-Z475400
155460851652651180475480415220450
70460684M36×70
GSL-Z510500
16049090180310128051052043024548070080500770M36×70
GSL-Z550630
160510951803101300550550470252510
85520800M36×70
GSL-Z580750
165515981853201315580560485258525
90540850M42×80
GSL-Z610840
2255801052103601550610610520280580
100600940M42×80
GSL-Z6601050
2456401152303901690660660540295630
100650990M42×80
GSL-Z7101300
2656801252504101800710710580315680
1107001070M42×80
GSL-Z7601600
2907301352604301920760760620340740
1207501150M42×80
ModelRoll-end connection dimensions d₃max nominal dimensionRoll-end connection dimensions d₃max limit deviationRoll-end connection dimensions H₂max nominal dimensionRoll-end connection dimensions H₂max limit deviationRoll-end connection dimensions l₃maxRoll-end connection dimensions l₄maxRoll-end connection dimensions CGearbox-end connection dimensions d₄ (H8)Gearbox-end connection dimensions d₅ (H7)Gearbox-end connection dimensions d₆ (JS10)Gearbox-end connection dimensions m×zGearbox-end connection dimensions n×d₇×H₃Gearbox-end connection dimensions l₅Gearbox-end connection dimensions l₆Gearbox-end connection dimensions l₇Mass kg LminMass kg per 100 mm increaseMass moment of inertia kg·m² LminMass moment of inertia kg·m² per 100 mm increase
GSL-Z200125+0.20 +0.1095+0.20 +0.10135175101551301104×366×M10×2535851201504.770.750.024
GSL-Z250150
110
195235151951701504×468×M10×2535901252076.801.620.05
GSL-Z285165
120
205245
2201951754×4610×M10×2540951302918.882.950.09
GSL-Z300180
130
210250
2201951755×4212×M12×30451001323229.483.620.11
GSL-Z335195+0.25 +0.15150+0.25 +0.15210255
2452202005×4612×M12×305010015046013.876.450.19
GSL-Z355195
150
215255
2602402205×5012×M12×305010015050718.677.990.29
GSL-Z390220+0.35 +0.20170+0.35 +0.20230275252802602405×5412×M12×305010015065019.9812.360.38
GSL-Z405240
180
240285
3052802605×5812×M12×305011015578523.2016.090.48
GSL-Z440260
190
250295
3363062766×5412×M16×405011515583626.6720.230.65
GSL-Z475280
210
272317
3653303006×5812×M16×4050115155103229.8429.110.84
GSL-Z510300+0.40 +0.25230+0.40 +0.25300355303903453156×6212×M16×4050130170153137.0149.781.20
GSL-Z550320
240
320375
4003703206×6412×M16×4050130170153739.1558.121.48
GSL-Z580340
260
325388
4053703206×6612×M16×4050135175176941.0474.391.73
GSL-Z610400
300
420470354554203708×5412×M20×5050160210249248.34115.912.25
GSL-Z660420
320
440500
4854404008×5812×M20×5060180230317853.65173.042.92
GSL-Z710460
350
4805404053047543010×5012×M20×5060190240369361.18232.713.85
GSL-Z760500
380
530590
57051547010×5412×M20×5060200250459271.27331.545.15

Engineering Context

This model is best understood from its own construction: Standard-mounted telescopic universal-joint arrangement; Length compensation paired with operating-angle data; Trunnion dimensions define the machine-side interface Industry selection practice checks torque and speed together with the movement, shaft interface, installation envelope and maintenance conditions allowed by that construction.

Technical Notes

  • Model symbols, units and empty or placeholder cells are shown as published.

  • Dimension letters must be interpreted with the relevant assembly drawing.

  • Published values support preliminary review and do not replace final engineering confirmation.

Assembly Drawing

GSL-Z Telescopic Crowned Gear Coupling, Standard Mounting assembly drawing
Use this assembly drawing together with the selected model row. Dimension symbols and connection details are drawing-specific; confirm final installation dimensions before manufacture or installation.

Information Required for Selection

  • Provide mounting orientation, installed span, angle and travel
  • Match trunnion, minimum length, torque and surrounding clearance
  • Send the exact model row, assembly drawing and actual duty data with the inquiry.

Product FAQ

How is GSL-Z different from GSL-F?

GSL-Z is the standard-mounted arrangement; GSL-F is reverse-mounted and requires a different interface review.

What should be confirmed before a GSL order?

Confirm angle, travel, trunnion dimensions, phasing and the exact mounting orientation.

Are the published values final ordering values?

No. They are preliminary engineering data; confirm the selected model, drawing, dimensions, materials, standard and suitability with RONGXING DRIVE.

Technical data is provided for preliminary selection. Confirm the final model, dimensions, materials, applicable standard and operating suitability with RONGXING DRIVE before quotation, manufacture or installation.

Request engineering support

Ask About GSL-Z Telescopic Crowned Gear Coupling, Standard Mounting

The product field is filled automatically. Add the available torque, speed, shaft, installation and operating-condition data for a useful first review.

Do not include passwords, payment details or unrelated personal information.

Continue browsing

Review other currently published product pages before preparing the inquiry.

Leave a Comment

Questions and practical feedback are welcome. Comments are reviewed before publication.

Your rating will be published with your comment after approval.
Verification code