Technical Resources
Jaw Coupling Spider Inserts: Types, Sizes and Replacement
Choose a jaw coupling spider by matching the coupling series, size and insert profile first. Then confirm the specified material and hardness for the operating duty. The spider is the resilient insert between the two hubs. Shaft bore and coupling out
Choose a jaw coupling spider by matching the coupling series, size and insert profile first. Then confirm the specified material and hardness for the operating duty. The spider is the resilient insert between the two hubs. Shaft bore and coupling outside diameter help identify the assembly, but the insert must match the shape and spacing of the jaws.
How do I choose the correct spider insert for an industrial jaw coupling?
Look for a manufacturer and size marking on both hubs and the old insert. Photograph the hub faces, then compare the jaw profile, lobe count and shape with the assembly drawing. If the markings are unreadable, measure the insert outside diameter, axial thickness and centre opening where applicable. Include a photo of the insert face and side. Use the old part as a clue, since wear or swelling can change its dimensions.
| Feature | What to check |
|---|---|
| Straight or curved jaw profile | Compare the insert lobes with the spaces between the hub jaws. An equal lobe count does not establish a match. |
| Solid or wrap-style insert | Check the assembly drawing for the removal direction and any retaining ring or sleeve. Some wrap designs allow radial removal if there is enough working clearance. |
| Material and hardness | Match the approved grade or ask the supplier to confirm an alternative for the duty. Colour conventions can differ between series and manufacturers. |
For more detail on hub and insert geometry, see the jaw coupling types guide.
How do you read a spider or star coupling size chart?
First check whether the chart lists the complete coupling or the spare insert. A complete coupling chart can list shaft bores, torque and assembly dimensions. An insert chart or spare-part drawing identifies the geometry and reference of the replaceable element. Use the assembly chart to identify the coupling and the spare-part drawing to match the insert.
| XL assembly size | Nominal torque Tn (N·m) | Catalogue permissible speed (r/min) | Assembly drawing dimension D (mm) |
|---|---|---|---|
| XL1 | 34 | 19,000 | 40 |
| XL2 | 120 | 14,000 | 55 |
| XL3 | 320 | 11,800 | 65 |
| XL4 | 650 | 9,500 | 80 |
| XL5 | 900 | 8,000 | 95 |
For example, 65 mm is dimension D on the XL3 assembly drawing. The spider outside diameter needs its own specification. Use the full Rongxing XL drawing and table for bore options and assembly dimensions, then ask for the insert reference. Rongxing ML Jaw Couplings have a separate model table and drawing. Check interchangeability against the two drawings and the supplier's part records. Catalogue torque and speed values are separate entries. Confirm that the selected coupling and insert suit the actual combination of load, speed and movement.

What information is needed before replacing the elastomer in a jaw coupling?
Send enough information for the supplier to check both fit and material. If you have the original drawing, mark the installed hub spacing on it.
Manufacturer, coupling series and size, readable insert reference, and photos of both hub faces and the old insert
Hub spacing, insert outside diameter, thickness and centre opening in mm where applicable
Operating speed in r/min, normal and peak torque in N·m if known, and any frequent starts, reversals or shocks
Temperature at the coupling and any oil or process-fluid exposure
Before reusing the hubs, check for damaged jaws, loose fit or signs that the hubs have touched. If an insert has failed repeatedly, compare the installed gap and alignment with the original instructions and review the actual duty. Confirm the part reference, compound and installation method against the drawing before fitting the replacement.