Curated technical topic

Pin Bush Couplings for Industrial Shaft Connections

Pin bush couplings connect industrial shafts through pin-and-sleeve arrangements. RONGXING DRIVE TL and TLL models have published size tables and assembly drawings. Use the TL/TLL size chart and English PDF catalogue to compare bore, torque, speed and installation dimensions. Related HL, HLL and LJ elastic pin designs use their own construction and model data.

TL/TLL size chart and PDF catalogue

View pin bush coupling sizes, dimensions and drawings for 13 TL and 9 TLL models.

Download the English TL/TLL catalogue PDF (3 pages, revision 21 November 2026). Use the model-specific data for preliminary comparison.

Industrial Rubber and Elastomeric Coupling Types

Industrial Rubber and Elastomeric Coupling Types

An elastomeric coupling connects two rotating shafts and transmits torque through a resilient element. Jaw couplings use a spider between the hubs, tyre couplings use a flexible ring, and some pin couplings use resilient bushes or sleeves. In industr

View details

Topic FAQ

pin bush couplings FAQ

What does pin bush coupling refer to on this page?

This page includes TL/TLL elastic sleeve pin couplings and related pin-type products. Their elastic parts and connection arrangements are not identical. Identify the series from the drawing before comparing sizes, maintenance requirements or replacement parts. See the TL flexible sleeve pin coupling to identify the sleeve-pin configuration discussed here.

What is the difference between TL and TLL couplings?

TL is the elastic sleeve pin configuration; TLL includes a brake wheel. Check the brake-wheel dimensions, braking duty and installation space as well as torque, speed and shaft interfaces. A brake-wheel version should be reviewed as a complete assembly. Check the TLL flexible sleeve pin coupling with brake drum drawing when reviewing the brake-equipped version.

Can replacement pins and bushes be ordered by bore diameter alone?

No. Provide the exact model, pin and bush dimensions, pin arrangement and assembly drawing. Inspect the flanges and mating parts before replacement. Matching the shaft bore does not establish the geometry or material of the wear parts.

When should a pin bush coupling be compared with a jaw coupling?

Compare them when shortlisting structures for a shaft-to-shaft drive, using torque, speed, displacement, torsional behaviour and maintenance requirements. Neither structure is universally better. Confirm bore, installation envelope and elastic-element conditions for each candidate. Use the same coupling selection comparison inputs when comparing pin bush and jaw configurations.

Where can I find a pin bush coupling size chart and PDF?

See the TL/TLL size chart and drawings for complete model tables. The English TL/TLL catalogue PDF contains both series for preliminary comparison.

Can the maximum torque, bore and speed be used together?

Series maxima can belong to different models. Check torque, permissible speed, bore, bore length and installation dimensions in the same model row, then confirm the actual duty.

Does the catalogue specify pin threads and tightening torque?

The TL/TLL catalogue provides complete-coupling dimensions and ratings. Confirm pin threads, shoulder geometry, material and tightening requirements from the approved parts and assembly drawings.

Does the size chart identify the replacement bush material?

The dimensional tables do not establish the bush material grade or hardness. Provide the exact series, part geometry, operating conditions and approved parts drawing when reviewing a replacement.

Need help with a model?

Send torque, speed, shaft and installation data for a preliminary review.

Request a Quote